top of page

STEERING COMPONETS

The Pilothouse Steering Control Panel is the main control center of the steering system.

PILOTHOUSE STEERING CONTROL

PART NO. 9999-49980

The pilothouse steering control panel is the main control center of the steering system. The control panel provides the operator with the ability to select which hydraulic pump system to operate and which steering mode to operate. Mode Selector - The mode selector switch allows the operator to select one of the modes of steering. An indicator is provided for each steering mode and is lighted when the associated steering mode is selected.

The Steering Pump Selector switch allows the operator to select either the #1 steering system, the #2 steering system or neither (OFF position)

PILOTHOUSE STEERING PUMP CONTROL PANEL

PART NO. 9999-51350

The steering pump selector switch allows the operator to select either the #1 steering system, the #2 steering system or neither (OFF position). Indicators are provided for each steering system and are lighted when the associated port and starboard steering system pumps are operating. A third position allows for the pumps to be controlled by the DP system. In this mode, all four pumps will activate giving th DP system full control and quicker responsiveness. A dimmer is provided to reduce the brightness of the lamps during operations. A lamp test allows the operator to check that the indicators will light and are functioning properly.

MOTOR STARTER

PART NO. 9999-51370

EMI offers a complete line of motor starters to match the requirements of your steering system hydraulic power unit. All starters are built with ABB components and are designed for 3HP to 60HP three phase motor applications. Soft starters are available for motor applications of 20HP and larger to reduce generator load.Our standard starters come with alarm outputs to meet ABS and USCG requirements.

  • Designed for 3HP to 60HP hydraulic power unit applications.

  • 5 to 160 full load amp capacities

  • Operating voltages available from 208VAC to 480VAC 50/60HZ.

STARTER SIZES:

EMI offers a complete line of motor starters to match the requirements of your steering system hydraulic power unit.

EMI offers local control units with 4.3” HMI touch screens. These touch screens provide the user with valuable real time information including motor run status, steering mode selection and steering command / rudder position.

STEERING LOCAL CONTROL UNIT WITH HMI

EMI offers Local Control Units with 4.3” HMI Touch Screens. These touch screens provide the user with valuable real time information including motor run status, steering mode selection and steering command / rudder position.
Emergency Steering for Linked Rudder Systems Integrated Digital Rudder Angle Indicator and Non-Follow-up Lever

SINGLE EMERGENCY STEERING STATION

PART NO. 9999-52110

  • Emergency steering for linked rudder systems

  • Integrated digital rudder angle indicator and non-follow-up lever

  • Also available with 5” analog rudder angle indicator

Emergency Steering for Independent Rudder Systems Two (2) Integrated Digital Rudder Angle Indicators and Non-Follow-up Levers

DUAL EMERGENCY STEERING STATION

PART NO. 9999-51990

  • Emergency steering for independent rudder systems

  • Two (2) integrated digital rudder angle indicators and non-follow-up levers

  • Also available 5” with analog rudder angle indicators

bottom of page